Self-hosting guide

Remote PC from your phone

Your Windows PC, on your phone, from anywhere — for free. No monthly fee, no session timer, no one else's server in the middle.

RustDesk is a free, open-source remote desktop app: it shows your PC's screen on your phone and lets you tap, type and move files as if you were sitting at the desk. Tailscale is the private network underneath it — it connects your PC and your phone directly, so nothing needs to be opened up on your home router and no outside server carries your screen. Together they are the simplest free way to reach a home PC from a phone while you are away.

Screen pictures on this page are illustrations of the layout to look for — sample names and addresses in them are placeholders, not captures from any real household.

Why this setup

Setup on the Windows PC

  1. Download RustDesk only from rustdesk.com — never from a mirror or a search-ad link. Pick the 64-bit Windows download. Check the version is newer than 1.4.5, ideally 1.5.x: older versions have serious security flaws that were fixed in March 2026.
  2. Install it — do not just run the portable file. The download is a single file that runs on its own at first. Open RustDesk, go to the menu next to your ID, then Settings > General, and click Install. That copies it into Program Files and runs it as a service, so it starts at boot and survives a restart and a logout. If you prefer the command line instead, run the downloaded file with the silent-install flag — use its real filename, which you can list first:
    Terminal — from the Downloads folder
    cd %USERPROFILE%\Downloads
    dir rustdesk*.exe
    rustdesk-1.5.x-x86_64.exe --silent-install
  3. Set a permanent password. In Settings > Security, set a strong password that is different from your Windows password, and save it in a password manager. This is the password you will type on your phone — it is RustDesk's own password, not your Windows one.
  4. Turn on Direct IP access in the same Security page. This is what lets your phone connect straight to the PC over the private network instead of going through a public relay.
  5. Install Tailscale on the PC, signed into the same Tailscale account you will use on your phone, and confirm the PC shows up in your Tailscale network.
  6. Keep the PC awake. Go to Settings > System > Power & battery and set Sleep (plugged in) to Never. The screen may turn off — that is fine. A sleeping PC cannot be reached at all, and that is the most common reason a remote setup "stops working" overnight. See the wake section below.

Setup on the Android phone

  1. Install RustDesk from the Play Store.
  2. Connect Tailscale on the phone, signed into the same account as the PC.
  3. Enter the PC's Tailscale address. In the RustDesk app, type the PC's Tailscale address in the ID box — it looks like 100.x.x.x — and tap Connect. You can find the address on the PC by clicking the Tailscale icon in the taskbar.
  4. Enter the permanent password you set on the PC. That is all the sign-in there is — no Windows username or password is needed.
  5. Expect one warning, and accept it. RustDesk will warn that a direct connection is unencrypted. That warning is about RustDesk's own transport; inside the Tailscale tunnel the connection is already encrypted, so it is safe to continue.
RustDesk on the phone
Enter the PC's Tailscale address100.x.x.x
Enter the permanent password→
Your PC's screenConnected

Illustration — the address is the PC's Tailscale address, and the password is the permanent password from the PC's RustDesk settings.

Moving files, and working on the phone

File transfer works both ways. In a session, tap the file-transfer icon in the toolbar: one side is your phone, the other is the PC, and you can send files in either direction. You can also choose File Transfer mode before connecting instead of full remote control.

Clipboard, keyboard and extra screens all carry over. Copy and paste works between phone and PC, the on-screen keyboard is there when you need to type, and if the PC has more than one monitor you can switch between them. On a large phone screen, trackpad mode — where your finger moves a cursor instead of tapping directly — is the comfortable way to do real work.

Wake from sleep: the honest limit

No remote tool can wake a sleeping or powered-off PC over the internet by itself. RustDesk has a Wake-on-LAN button, but it needs another device that is already awake on the same home network to send the wake-up signal — a phone away from home cannot do it alone.

The reliable fix is the one in the setup above: set the PC to never sleep while plugged in. A small Windows mini PC left on around the clock uses little power, and it is the same always-on habit that keeps a home server reachable in the first place. If the PC does fall asleep, someone at home has to wake it — there is no remote shortcut.

Test before you rely on it

Do these three checks while you are still at home, so a failure is a five-minute fix instead of a problem discovered while you are away:

  1. Mobile data, not home Wi-Fi. Turn Wi-Fi off on the phone and connect again. If it only works on home Wi-Fi, the private network is not set up right yet.
  2. After a reboot, from the login screen. Restart the PC and connect before signing in on it. If RustDesk is installed as a service, this works; if it was only run as a portable file, it will not.
  3. One file each way. Send a small file from the phone to the PC and one back, so you know file transfer works before you need it.

If the PC is Windows 11 Pro: a sharper alternative

Windows 11 Pro has Remote Desktop built in, and over the same Tailscale network it is the sharpest option — no third-party app at all. Turn on Remote Desktop in Settings > System > Remote Desktop, then connect from the Windows App on the phone using the PC's Tailscale address.

There is one catch that sends many people back to RustDesk: Remote Desktop does not accept a Windows Hello PIN. It needs the real Windows or Microsoft password behind the PIN. If you sign into the PC with a PIN and do not know that password, set one first in Settings > Accounts > Sign-in options > Password — your PIN keeps working for normal sign-in. RustDesk avoids the whole problem, because it uses its own permanent password.

What to avoid

TeamViewer Free and AnyDesk Free are not reliable as your only way in. Both are free for personal use on paper, but both watch for commercial use and cut flagged sessions short — sometimes to a few minutes — with no published limit you can plan around. A tool that might lock you out at the worst moment is a poor backup for a PC you are away from. RustDesk has no such flagging, and Chrome Remote Desktop is a solid free backup if you want a second, independent way in.

Links and limits

This page is a field report, not a manual: RustDesk moves fast, so for version-specific details follow the official docs linked above. The durability limits to know: the free setup rides on RustDesk staying free and open source, and on Tailscale's free personal plan — and the PC must stay awake, because nothing here can wake it remotely.